Description
2026 Winner
Kickstarter’s Most-Funded 3D Printer
SnapSwap™ Toolchanging System.
4 Toolheads. Direct Swaps in 5s.
Minimal Purge.
Up to 85% Less Waste.
Multi-Material Freedom.
Rigid Meets Flexible & Beyond.
General
| Dimensions | 584 × 499 × 730 mm584 × 499 × 730 mm |
| Weight | 18.2kg |
Printing Properties
| Printing Technology | Fused Deposition Modeling |
| Build Volume | 270 × 270 × 270 mm |
| Max Toolhead Speed | 500mm/s |
| Max Acceleration Speed | 20,000mm/s² |
Toolhead
| Toolheads Included | 4 |
| Max Flow for Hot End | 32mm³/s[7] |
| Nozzle | Stainless Steel |
| Max Nozzle Temperature | 300°C |
| Nozzle Diameter | 0.4mm |
| Filament Diameter | 1.75mm |
| Part Cooling | Main & Auxiliary Part Cooling Fans |
Heated Bed
| Build Plate | Flexible Steel Sheet with PEI Surface |
| Max Heated Bed Temperature | 100°C |
Supported Filament Type
| Basic Material Compatibility | PLA, PETG, TPU, PVA, PCTG |
| With Optional Top Cover | PLA, PETG, TPU, PVA, PET, ABS, ASA, PA, PC |
| With Top Cover & Hardened Steel Nozzle | PLA, PETG, TPU, PVA, PET, ABS, ASA, PA, PC, Carbon-fiber-reinforced Polymer, Glass-fiber-reinforced Polymer |
Electronics
| Touchscreen | 3.5-inch 320 × 480 Touchscreen |
| Data Transmission Methods | Wi-Fi (IEEE802.11b/g/n Standards, 2.4GHz), USB Flash Drive |
| Storage | 26 GB eMMC |
| Live View Camera | 2 Megapixel Built-in Chamber Camera |
| Max Input Power | 1150 W (220-240 V~), 400 W (100-120V~) |
| Max Input Current | 6 A(220-240V~), 4 A(100-120 V~) |
Auto-calibration
| Heated Bed Leveling | Mesh Bed Leveling |
| Active Vibration Control | Accelerometer & Input Shaping Calibration |
| Automatic Flow Compensation | Pressure Advance Calibration |
| Automatic Toolhead Offset Calibration | Coordinate Measuring Calibration |
Automatic Filament System
| Auto-feed | Supported |
| Backup Mode | Supported |
| Filament RFID Recognition | Supported |
Failure Detection
| Air Printing Detection | Supported |
| Filament Run-Out Detection | Supported |
| Power Loss Recovery | Supported |
Anomaly Detection
| Toolhead Swap Error Detection | Supported |
| Build Plate Presence Detection | Supported |
| Build Plate Obstruction Detection | Supported |
Software
| Supported Slicer | Snapmaker Orca, OrcaSlicer |
| APP | Snapmaker APP |
Operating System
| Software | Windows, macOS, Linux |
| APP | Android, iOS |
Firmware
| Firmware | Klipper |
